Features: strong adhesion, seamless dust, wear, flatness and excellent hiding power. Resistant to slightly acidic, slightly alkaline, anti-virus and good, safe and nontoxic. Applications: The original old epoxy floor repair, hospitals, pharmaceutical, electronics, food factory laboratory, underground parking places or at light industry; garment factories, printing houses, toy factory, textile mills; electronics factory, printing plants, paper plants and other non-weight places, warehouses, parking lots. Construction process: Base surface treatment, cleaning, polishing; ground must be dry, smooth; undercoating, enhanced bonding strength with the ground; depending on the thickness requirements for the coating or putty construction; laying epoxy topcoat. Technical indicators paint anti-static floor Dongguan enamelled work and materials, economical floor paint professional construction project Indicators Table dry time (h) ≤4 drying time (h) ≤24 practical period (h) 5 Impact resistance (1kg / cm ) 70 Adhesion (grid spacing 1mm, level) ≤1 pencil hardness (scratch) ≥H Flexibility (mm) ≤2 wear (750g / 500r) / g ≤0.040 Water resistance (7d) does not blister, do not fall off, allowing a slight discoloration oil resistance (120 # gasoline, 7d) does not blister, do not fall off, allowing a slight discoloration alkali resistance (10% NaOH, 48h) does not blister, do not fall off, allowing a slight discoloration of the acid resistance (10% H2SO4,48h) does not blister, do not fall off, allowing a slight discoloration of salt water (3% NaCl, 7d) does not blister, do not fall off, allowing a slight discoloration preparation method 4.1 Group A points before use Stir and press A ingredients: Part B = 4: 1 ratio (weight ratio) preparation, aging 10 to 20 minutes after the stir, the construction used within four hours. 4.2 Construction conditions: concrete maintenance shall be more than 28 days, the substrate moisture content ≤8%, relative humidity ≤85%, construction temperature ≥5 ℃, coating interval of 12 ~ 24h. 4.3 application viscosity requirements: special thinner diluted with peaceful licensing qs to a viscosity of 12 ~ 16s (Tu -4 cups) when you can. 4.4 Prime handling requirements: The floor sander or sandblasting machine will loose layer floor, the cement stains, lime film foreign matter is removed and the unevenness of the ground level, the floor space dedicated cleaner clean. 4.5 In order to maintain the effect of the final cured coating and cause the coating dries, during construction and after construction is completed, should be kept well ventilated. 4.6 Theory of consumption: the painting environment without considering the actual construction time, the surface condition of the impact with the ground floor structure, construction of surface area of ??the coating thickness ≤0.1mm, general paint consumption 80 ~ 120g / m. 4.7 Construction Method: For the full depth of the primer to the substrate, increasing adhesion, preferably by roller coating methods. 5 5.1 Construction Safety requirements must avoid breathing vapors, eyes, skin contact with this product may not; required to maintain adequate ventilation during construction 5.2; 5.3 away from sparks and fire, its packaging have been opened, should be used as soon as possible; 5.4 note on the package security tags. 6 Packaging 6.1 primer used iron sealed package or plastic barrel, net weight 15kg, barrel curing agent NW 15kg, barrel diluent net 15kg. 6.2 Storage and transport: is flammable, keep away from fire and stored in a cool dry ventilated place, avoid collision, is strictly prohibited contact with water. 6.3 is valid for six months, more than valid, the re-test can still be using.